BNQDR - M-864 BASE BURNER,P/N 9381130

  • MSDS: BNQDR
  • Manufacturer: TALLEY DEFENSE SYSTEMS INC
  • Product Name: M-864 BASE BURNER,P/N 9381130
  • National Stock Number: 1320-01-231-1693
Product Identification

Product ID:M-864 BASE BURNER,P/N 9381130
MSDS Date:10/17/1990
FSC:1320
NIIN:01-231-1693
MSDS Number: BNQDR

Responsible Party
TALLEY DEFENSE SYSTEMS,INC
3500 NORTH GREENFIELD ROAD
MESA, AZ 85211
US

Emergency Phone: 602-898-2200

Info Phone: 602-898-2200

Preparer: GS KERR

Cage: 12116

Contractor
TALLEY DEFENSE SYSTEMS
MESA, AZ 85201

Telephone: (602) 898-2200

Cage: 12116

Ingredients

BASE BURNER ASSEMBLY.CONTAINS COMPLEX EXPLOSIVE MIXTURE

RTECS: 9999999ZZ

OSHA PEL NOT KNOWN

ACGIH TLV: NOT KNOWN

Hazards

LD50 LC50 Mixture:NOT KNOWN
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:AS SHIPPED,THE ARTICLE IS SEALED AND
PRESENTS NO EXPOSURE TO POTENTIAL HEALTH PROBLEMS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:THIS ARTICLE IS SEALED PREVENTING
RESPIRATORY,INGESTION AND/OR SKIN EXPOSURE TO CHEMICALS.
Medical Cond Aggravated by Exposure:NOT KNOWN

First Aid

First Aid:EYES:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES .

Fire Fighting

Flash Point:NOT KNOWN
Lower Limits:NOT KNOWN
Upper Limits:NOT KNOWN
Extinguishing Media:NOT KNOWN
Fire Fighting Procedures:DO NOT ATTEMPT TO FIGHT A FIRE INVOLVING ANY
EXPLOSIVE ARTICLE.
Unusual Fire/Explosion Hazard:EXPLOSIVE ARTICLES MAY IGNITE & BURN
RAPIDLY RESULTING IN MASS FIRE,GAS,EXCESSIVE HEAT & POSSIBILE
PRESSURE BURST OR DETONATION.THIS ARTICLE WILL BE PROPULSIVE.

Accidental Release

Spill Release Procedures:DAMAGED ARTICLES/CONTAINERS SHOULD BE MANAGED
BY QUALIFIED PERSONNEL TAKING THE NECESSARY PRECAUTIONS TO PREVENT
FURTHER DAMAGE.DAMAGED OR QUESTIONABLE ARTICLES SHOULD BE RETURNED
TO THE ORIGINAL SHIP PING CONTAINER OR EQUIVALENT.
Neutralizing Agent:NOT KNOWN

Handling

Handling and Storage Precautions:AVOID EXPOS TO SUDDEN
SHOCK,PRESS,FRICTION,ELECTROSTATIC DISCHARGE,FLAME & EXCESSIVE HEAT
DURING SHIPMENT,STOR & USE.ARTICLE IS SEALED & ELEC(SEE SUP)
Other Precautions:ONLY QUALIFIED PERSONNEL SHOULD BE ALLOWED TO MANAGE
HAZARDOUS MATERIALS.USE ONLY IN APPLICATIONS AND UNDER THE
CONDITIONS FOR WHICH IT WAS DESIGNED.AVOID INHALATION OF COMBUSTION
PRODUCTS.

Exposure Controls

Respiratory Protection:CONTACT LOCAL SAFETY/INDUSTRIAL HYGIENE OFFICE
TO DETERMINE IF RESPIRATORY PROTECTION IS REQUIRED .
Ventilation:CONSULT LOCAL SAFETY/HEALTH AUTHORITIES IF ADDITIONAL
GUIDANCE IS NEEDED .
Protective Gloves:NOT KNOWN
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:FLAME RESISTANT CLOTHING AND STATIC
GROUNDING DEVICES SHOULD BE USED WHEN HANDLING ANY EXPLOSIVE
ARTICLE.
Work Hygienic Practices:NOT KNOWN
Supplemental Safety and Health
PROPELLANT ID:TAL-1503-TYPE AP/HTPB;INITATOR TAL-I-12;NO BOOSTER.WASTE
DISP:SITE & UNDER APPRVD PROC IAW REGS.HAZ WASTE CHARACT OF
REACTIVITY,PER 40 CFR 261 SUBPART C.DISP OF LIVE ARTICLE MUST
COMPLY W/ HAZ WASTE REGS (RCRA) IN 40 CFR PART260-272.HNDLG/STOR
PREC:INITIATING DEVICES SHUNTED MAKING IT STABLE FOR SHIPMENT

Chemical Properties

Boiling Pt:B.P. Text:NOT KNOWN
Melt/Freeze Pt:M.P/F.P Text:NOT KNOWN
Decomp Temp:Decomp Text:NOT KNOWN
Vapor Pres:NOT KNOWN
Vapor Density:NOT KNOWN
Spec Gravity:NOT KNOWN
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NOT KNOWN
Appearance and Odor:SEALED EXPLOSIVE MIXTURE.CONTAINS COMPLEX EXPLOSIVE
MIXTURE/IGNITION MATERIALS.

Stability

NOT KNOWN
Stability Condition to Avoid:SUDDEN SHOCK,PRESS,FRICTION,ELECTROSTATIC
DISCHARGE,FLAME & EXCESS HEAT.
Hazardous Decomposition Products:END USE OR INVOLVEMENT IN FIRE MAY
RESULT IN RELEASE OF LARGE VOLUMES OF GAS.

Disposal

Waste Disposal Methods:DISP MUST BE IAW FED,STATE,& LOC
REGS.COORDINATION W/ SUPPORTING INSTALLATION/MACOM ENVIRONMENTAL
COORDINATION PRIOR TO DISP IS REC TO DETERM APPROP DISP METH .DISP
OF LIVE (UNFIRED) ARTICLE MUS T BE BY QUALIFIED PERSONNEL AT APPRVD
(SEE SUPP)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.